Ubiquiti U-POE+ Gigabit Power Over Ethernet PoE+ Injector image 1
Ubiquiti U-POE+ Gigabit Power Over Ethernet PoE+ Injector image 2
Ubiquiti U-POE+ Gigabit Power Over Ethernet PoE+ Injector image 3
1 / 3
Ubiquiti

Ubiquiti U-POE+ Gigabit Power Over Ethernet PoE+ Injector

SKU NE-U-POE+ · MPN U-POE+

£16.99 inc VAT

In stock, ships in 1 working day

Single-port Gigabit PoE+ injector that adds power to a UniFi PoE+ device over the same Ethernet cable, without needing a PoE switch.

Buying for a hotel or business? Request a bulk quote

Power standardPoE+ (802.3at)
Data connectionGigabit Ethernet
Ports1 PoE output
Packaged size210 x 130 x 40 mm
Weight0.26 kg

The Ubiquiti U-POE+ is a compact Gigabit PoE+ injector for powering a network device that is not connected to a PoE switch. It takes power from a standard mains supply and sends it down the same Ethernet cable that carries the data, so one cable can run a UniFi access point, camera or other PoE+ device.

Why use an injector

Many small sites have a switch without enough PoE ports, or a switch with no PoE at all. An injector lets you power one device where it is installed without replacing the switch. It also takes some load off the switch’s own power budget, which helps when that switch is already close to its limit.

Setup notes

The unit provides a Gigabit data connection, so it suits devices that use Gigabit Ethernet. Connect the switch to the data input, the powered device to the PoE output, and then the mains lead. Check that your device supports PoE+ before ordering, because an injector only helps when the power standard matches.

Is it right for you?

Choose the U-POE+ for a single PoE+ device where you need a simple, one-port solution. For other power levels, browse our PoE injector range, and GGG Technologies can advise on the right unit for your network.

  • Single PoE+ output for one powered device
  • Gigabit LAN data connection
  • Power and data over one Ethernet cable
  • Designed for UniFi PoE+ devices
  • Reduces the power draw on the upstream PoE switch
  • Mains-powered injector
Does the U-POE+ work with any PoE device?

It is designed for PoE+ devices and is aimed at UniFi equipment. Check your device's power requirements and the manufacturer datasheet before ordering.

Do I still need a PoE switch?

No. The injector adds power to a single device on a standard network, so a PoE switch is not required for that device.

Is the injector a Gigabit unit?

Yes. It provides a Gigabit LAN connection, so it suits Gigabit Ethernet devices.

More in Accessories