Ubiquiti PBE-5AC-Gen2 PowerBeam AC Gen2 5GHz WiFi Access Point image 1
Ubiquiti PBE-5AC-Gen2 PowerBeam AC Gen2 5GHz WiFi Access Point image 2
Ubiquiti PBE-5AC-Gen2 PowerBeam AC Gen2 5GHz WiFi Access Point image 3
1 / 3
Ubiquiti

Ubiquiti PBE-5AC-Gen2 PowerBeam AC Gen2 5GHz WiFi Access Point

SKU NE-PBE-5AC-Gen2 · MPN PBE-5AC-Gen2

£106.99 inc VAT

In stock, ships in 1 working day

Dish-reflector 5GHz PowerBeam AC Gen2 with the radio built into the feedhorn, for long-distance bridge links of up to 25 km. Two units are needed.

Buying for a hotel or business? Request a bulk quote

Frequency band5GHz
RangeUp to 25,000 m
Units per link2
Weight3.6 kg
DesignDish reflector with integrated radio

The Ubiquiti PBE-5AC-Gen2 PowerBeam AC is a 5GHz dish-reflector unit for long-distance point-to-point bridge links. It is a good fit for connecting two buildings across an industrial estate, a rural site or a campus where the distance rules out a standard access point. Each link needs two matching units, one at each end.

Design and range

The radio is integrated into the feedhorn of the antenna, so there is no cable between the two. The manufacturer says this removes cable losses and improves performance. The stated range is up to 25,000 metres, and the faster processor and mechanical design are intended to give good performance at a modest cost.

Installation considerations

The unit weighs around 3.6 kg, so the mounting arm and pole or wall bracket need to be solid enough for the load and wind exposure. Line of sight between the two ends is essential for long links. Aim each dish carefully and check the signal before tightening the mounts.

Is it right for you?

Choose the PBE-5AC-Gen2 for a long 5GHz bridge where you can mount two units with a clear path between them. For short runs or a single-unit solution, look at the options in our point-to-point wireless range. GGG Technologies can survey the path and install the link for you.

  • Dish-reflector design with integrated radio in the feedhorn
  • Range of up to 25,000 metres
  • Two units required to form a bridge link
  • Faster processor than the previous generation (manufacturer figure)
  • No antenna cable between radio and antenna
  • Suitable for long-distance outdoor links
How many units do I need?

Two. The PBE-5AC-Gen2 must be paired with a second unit to bridge the link.

How far can it reach?

The manufacturer quotes up to 25,000 metres. Line of sight and installation quality will affect the result, so check the datasheet.

Is it suitable for indoor use?

It is an outdoor link unit. Check the datasheet for the installation environment before you order.

More in Networking