
Ubiquiti Keystone Blank Insert Pass-Through 12-Pack (UACC-KEYSTONE-BLANK-INSERT-TH)
- 12 inserts
- Keystone blank insert
- 0.06 kg
SKU NE-DPS-550AB-36G · MPN DPS-550AB-36G
Only 2 left
A replacement hot-swap 550W power supply for the MikroTik ROSE Data Server RDS2216, so a failed unit can be swapped without stopping the server.
Buying for a hotel or business? Request a bulk quote
| Type | Hot-swap PSU |
|---|---|
| Model | DPS-550AB-36G |
| Output | 12V, 550W total |
| Compatible device | ROSE Data Server RDS2216 |
| MTBF | Approximately 200,000 hours at 25 degrees Celsius |
| Weight | 1.292 kg |
| Box size | 555 x 195 x 75 mm |
The MikroTik DPS-550AB-36G is a hot-swap power supply made for the ROSE Data Server RDS2216. It provides a 12V output with a total capacity of 550W, matched to the power design of that server, and it can be exchanged while the server keeps running, which helps a site avoid downtime when a power unit fails.
Power supplies are one of the components most likely to need replacing in a rack. Holding a matching hot-swap unit on site means an engineer can restore a redundant feed quickly, rather than waiting for a delivery during an outage.
The manufacturer gives a mean time between failures of approximately 200,000 hours at 25 degrees Celsius. The unit is designed to keep heat output and power consumption low, which supports stable operation in a data cabinet.
Confirm the part against your server model before ordering, and follow the hot-swap procedure in the device documentation when fitting or removing the unit. Keep the spare in a dry, dust-free place until it is needed.
If you run an RDS2216 and want a spare hot-swap supply, this is the correct part. Browse other parts in our networking accessories range. GGG Technologies can review your rack power setup and advise on redundancy for your site.
It is made for the ROSE Data Server RDS2216. Check your model before ordering.
The unit provides 12V with a total output of 550W.
It is a hot-swap unit, so it can be exchanged without stopping the server, but follow the device documentation.



