MikroTik GPeR Gigabit Passive Ethernet Repeater image 1
MikroTik GPeR Gigabit Passive Ethernet Repeater image 2
MikroTik GPeR Gigabit Passive Ethernet Repeater image 3
MikroTik GPeR Gigabit Passive Ethernet Repeater image 4
1 / 4
MikroTik

MikroTik GPeR Gigabit Passive Ethernet Repeater

SKU NE-GPeR · MPN GPeR

£23.99 inc VAT

Only 4 left

A small gigabit Ethernet repeater with two RJ45 ports on each side, extending a cable run in a tall building or long corridor without a new switch.

Buying for a hotel or business? Request a bulk quote

Ports2 x Gigabit RJ45 each side
RangeUp to 1500 m with chaining
PoEYes
Weight0.04 kg
Box size138 x 50 x 23 mm

The MikroTik GPeR is a gigabit Ethernet repeater that extends a network cable beyond its normal length. It contains a small switch chip and two gigabit RJ45 ports on each side, so it forwards data along the run rather than simply boosting the signal.

Extending runs in buildings

Tall buildings, multi-apartment blocks and offices with several floors often need cable runs that are longer than the standard limit. Rather than installing a second switch or a long and costly cable, a GPeR can be placed part way along the route to carry the connection on.

Reach and chaining

The manufacturer states that a single run can reach about 150 metres from the source, and up to about 210 metres between two GPeR units. Up to seven units can be chained for a total range of up to 1,500 metres, depending on cable quality.

Power and installation

The unit can receive power over Ethernet at its input, and the jumpers can be removed where the destination device cannot accept PoE. Check your device requirements before fitting, and use good quality cable for the best results.

Is it right for you?

If you need to reach a distant access point or device without a new switch, the GPeR is worth considering. For more network accessories, browse our networking accessories range. GGG Technologies can survey a building and advise on the best way to extend the network.

  • Two gigabit RJ45 ports on each side
  • Forwards data through a small switch chip
  • Reach up to about 150m from source, 210m between two units
  • Up to seven units can be chained for up to 1500m
  • PoE input with removable jumpers
How far can a GPeR extend a cable?

The manufacturer states up to about 150m from the source and about 210m between two GPeR units, depending on cable quality.

Can I chain several units?

Yes, up to seven can be chained for a total range of up to 1500m.

Does it need a separate power supply?

It can receive PoE at its input. Check the device requirements and the datasheet for the setup you plan.

More in Networking