
HPE Networking Instant On 1930 48G PoE 4SFP+ 370W Switch JL686B
- 48 x Gigabit
- 48 x PoE+
- 370 W
SKU NE-VSP2282X-K · MPN VSP2282X-K
In stock, ships in 1 working day
24-port Gigabit PoE+ managed switch with 4 x 10G SFP+ uplinks, a 400 W PoE budget and DC and AC power options for redundancy.
Buying for a hotel or business? Request a bulk quote
| RJ45 ports | 24 x Gigabit |
|---|---|
| PoE | PoE+ on each port |
| PoE budget | 400 W aggregate |
| SFP+ ports | 4 x 10G |
| Power options | DC and AC |
| Management | Standalone or DrayTek ACS3 |
| Weight | 3.59 kg |
| Packaged size | 505 x 75 x 295 mm (W x H x D) |
The DrayTek VigorSwitch P2282X-K is a 24-port Gigabit switch with PoE+ on each port and a total aggregate PoE budget of 400 W. It suits healthcare centres, retail point-of-sale areas and other sites where cameras, phones and access points must stay online, with four 10G SFP+ cages for high-speed fibre or copper uplinks.
The switch offers both DC and AC powering options, so the network can keep running if one supply fails or the mains is interrupted. That makes it a sensible choice for critical deployments, where a short outage can stop card payments, alarms or patient systems.
The P2282X-K supports 802.1Q VLANs by tag, port and MAC address, with VLAN routing and dedicated voice VLANs. Quality of Service, port mirroring and link aggregation are included, along with IPv4 and IPv6 support, so you can prioritise traffic and monitor the network from one device.
The switch works well on its own, and it is compatible with DrayTek’s ACS3 central management service for remote provisioning and monitoring. The supplier notes that stacking with other P2282X switches is possible after a software update, so you can add capacity later.
Choose the P2282X-K if you need 24 PoE+ ports, 10G uplinks and power redundancy in one managed switch. For other sizes, see our PoE switch range. GGG Technologies can design, install and configure a DrayTek network for you.
Yes. It offers both DC and AC powering options, so it can keep running if one supply is interrupted.
Yes. It is compatible with DrayTek's ACS3 central management service, and it also works as a standalone device.
The supplier says stacking with other P2282X switches is possible after a software update.



