
Bold Smart Lock – SX-55 Keyless Cylinder Smart Door Lock
- Keyless smart cylinder lock
- 46-55 mm
- 50-65 mm
SKU NE-UACC-LOCK-STRIKE-SECURE-15MM · MPN UACC-LOCK-STRIKE-SECURE-15MM
In stock, ships in 1 working day
Fail-secure 12V DC electric strike lock for single doors, so the door stays locked if power is lost, for use with an access controller.
Buying for a hotel or business? Request a bulk quote
| Lock type | Electric strike, fail-secure |
|---|---|
| Voltage | 12V DC |
| Door type | Single door |
| Weight | 1.06 kg |
| Box dimensions | 320 x 100 x 140 mm |
This Ubiquiti fail-secure strike lock is an electric lock for a single door, powered at 12V DC. A fail-secure lock stays locked when the power is lost, which suits entrances where security must be maintained during an outage. It is normally used with an access controller, card reader or keypad.
The strike sits in the door frame and works with the door latch. Because it is an electric strike rather than a complete lock, you will also need a suitable access controller, power supply and a way to release the door, such as a button or reader. Plan these parts together before ordering.
Fitting a strike lock depends on the frame, the latch type and the door’s swing. Check the manufacturer datasheet for the required mounting and wiring details, and confirm that the 12V DC supply is available at the door. If the door is used as an escape route, make sure the fail-secure choice is acceptable under your local fire safety rules.
Choose this strike if you need a fail-secure electric lock for a single door that is part of a managed access system. For a complete self-contained lock, see our smart door locks range. GGG Technologies can survey the door and specify the controller and wiring for you.
A fail-secure lock stays locked when power is lost. Check the manufacturer datasheet and local fire safety rules before using it on an escape route.
Yes. An electric strike is normally driven by an access controller, card reader or keypad, which are sold separately.
The strike is listed as 12V DC. Confirm your power supply matches this before installing.



