BT ADSL Microfilter POTS Splitter image 1
BT

BT ADSL Microfilter POTS Splitter

SKU NE-4374636 · MPN 4374636

£9.99 inc VAT

In stock, ships in 1 working day

ADSL microfilter that separates broadband from your telephone line, so a phone and ADSL broadband can share the same socket cleanly.

Buying for a hotel or business? Request a bulk quote

TypeADSL microfilter (POTS splitter)
Weight0.09 kg
Shipping box dimensions200 x 10 x 200 mm

The BT ADSL microfilter is a small plug-in filter that sits between a telephone socket and a telephone or other phone equipment. It removes the high-frequency signal that ADSL broadband puts on the line, so calls stay clear and the broadband connection can stay stable.

Why a microfilter is needed

ADSL broadband and ordinary telephones share the same copper line. Without a microfilter, the broadband signal can cause crackling, hissing or dropped calls, and the telephone can interfere with the broadband connection. Fitting a filter on each phone socket keeps the two services separated.

Fitting it

Plug the microfilter into the wall socket, then connect your telephone or extension lead to the filter’s phone socket. The filter has no settings to adjust, so installation takes only a few minutes for most homes and small offices.

Is it right for you?

Choose this filter if you have ADSL broadband and a standard analogue telephone. For full-site telephone and network installation, see our telephony range, or ask GGG Technologies about the right solution for your premises.

  • ADSL microfilter for telephone sockets
  • Separates broadband from telephone line
  • Plug-in installation, no settings to adjust
  • Helps reduce line noise on calls
Do I need a microfilter on every phone socket?

Typically each telephone socket used with an ADSL connection needs a filter. Check your broadband provider's guidance for your set-up.

Will it stop all line noise?

It reduces interference from ADSL broadband on the phone line. Line quality can also depend on the wiring, so check with your provider if problems continue.

Does it need any configuration?

No. It is a plug-in filter with no settings to adjust.

More in IP Hardware PBX